Frequently Asked Questions

Chimneys need to allow free passage of dangerous combustion gasses. Regular cleaning removes soot and helps prevent dangerous chimney fires. Cleaning improves the efficiency of some appliances, saving you money on fuel. Creosote, cobwebs, nest material etc. will also be removed. Many insurance providers now also insist on a Certificate of Chimney Sweeping.

The sweeping frequencies below are for guidance. The frequency will depend on a number of factors including: Type of fuel, appliance used, frequency and duration of use, moisture content of wood fuel, type of chimney. We will be able to advise on what’s best for you during their visit.

 

Smokeless fuel: At least once a year

Wood: Quarterly when in use

Bituminous coal: Quarterly when in use.

Oil: Once a year

Gas: Once a year

Guild sweeps undertake the most extensive training and assessment programme in the UK. The Guild requires member sweeps to be fully insured for Chimney sweeping and equipped to deal with all standard job situations. Members must undertake regular refresher training. Many members undertake additional professional training and are experts in their field. In the unlikely event your Guild sweep is unable to help, they should be able to recommend someone who can.

In general, we will need a clear passage from your door to the fire and adequate space to work in. Clear any ornaments from the hearth and perhaps from the mantelpiece. In particular, clear the grate of any fuel / ash / rubbish. Pets should be kept secure during the visit. Please ensure your appliance is unlit and cold.

This is a very good question to ask when booking any sweep. The answer is – No.

 

We have a number of best practice techniques for preventing dust escapes. We provide clean dust sheets to cover the fireplace area and seal the opening, an industrial hepa-filter vacuum is always used to contain soot/dust. A rare exception may be when the chimney is blocked, you will always be consulted before we attempt to remove the blockage.

Yes, absolutely, and perhaps more often than before. Manufacturer’s warranties on the new flue will usually require proof of frequent sweeping. We will issue a Certificate of Chimney Sweeping and can advise on compliance and maintenance aspects of your system.

Yes. Although burning these fuels does not normally deposit soot there are other problems which can affect chimney function and sweeping can solve or identify these. It is often the case that customers employ us ahead of an annual service visit.

Some jobs may take longer to complete so expect to pay more if extra time is necessary. If you are comparing prices of different sweeps try to make sure you are comparing like for like. There is no substitute for experience and professionalism. Cost may also vary in different parts of the country (including congestion charges, parking charges, toll fees etc.). Guild sweeps can often supply expert advice on fuels and how to get the best out of your stove or fire. This advice alone could save you more than the cost of a sweep over the course of a burning season.

To demonstrate to you that the flue has been swept throughout its length. Some customers also deem it as “Good luck” to see the brush.

We are trained to high standards and conversant with the complexities of solid fuel heating, venting systems and the associated building regulations. We have also undertaken extensive additional product knowledge training courses. If we don’t know the answer, we know where to find it.

Yes! 100% and please do not be tempted to “try it out” before it’s swept. A chimney fire isn’t the kind of housewarming you want. We can help identify potential defects and dangers.

We will remove the nest and recommend a suitable bird guard for your chimney.

There are a number of problems with using wood that is too wet. First, it’s a waste of money / time. Secondly, it can cause major fire risk problems inside the chimney. Thirdly, it dramatically increases air pollution.

 

Burning wet wood reduces the temperature of the fire, reducing the efficiency and heat output. Much more unburned fuel vapour goes up the chimney. The excess water also goes up the chimney. This lower burning temperature and increased fuel vapour and water mix easily causes “tar” or “creosote” to be deposited. It can build up to a thick “glaze” which can’t be easily removed and is a serious fire risk. If your sweep is genuinely worried about tar build up in your chimney, you need to take advice.

You may hear different answers to this question. The right answer is, it depends. If left as tree trunks or large rings it will take some time, possibly years. If cut and split in to logs and properly stacked, it can take from a few months to about a year depending on local conditions and type of wood. Again, aim for less than 20 % moisture. Good ventilation is the key.

 

Please note that in areas of high average humidity e.g. Cornwall and Devon, it can be very difficult to achieve the desired 20%.

Yes, of course, as long as they are dry. You may have heard that these types of wood cause “tar” or “sap” problems in chimneys but it’s just not true. They are less dense and so you’ll need to use around 25% more softwood to get the same heat output as hardwood. A kilo of softwood will give about the same heat energy as a kilo of hardwood. These woods are not so suitable for open fires as they tend to spit and spark.

Until you are experienced, use a moisture meter. Over time you will learn how dry logs look and feel. Generally they will have cracks in the ends (radial cracks) and they will feel lighter than you think. Only burn logs with less than 20% moisture.

Split the log with an axe and press the probes of the meter in to the split surface. Testing the outside surface of a log can give a false reading. You should only burn logs that are 20% moisture or less.

A well ventilated log store is best. Stacking the logs will ensure they are well ventilated and it’s a good idea to keep some air below them so stacking on old pallets is ideal. A roof is nice to keep the rain off the top ones but it is not as important as good ventilation. Good ventilation will quickly dry off any surface moisture when the rain stops. If it rains a lot where you live then it’s best to use a good store

Kiln dried logs have been heated in an oven until the moisture is generally below 20%. They may be a good idea if you can’t trust other sources or if your own supply has run out or is not dry enough yet. With correct storage and a bit of time you can easily achieve this level of moisture with your home dried logs – see “How long does it take to dry / season logs or wood” above.

You need to check with the manufacturer of the fire. Generally if it has a grate with an air space below, it should be fine. If your chimney/ flue is a steel system or liner you should avoid long slow burning or “slumbering” with smokeless fuels. Slumbering like this can damage a steel chimney due to cool flue gasses allowing very acidic conditions inside the chimney / flue. Always ensure there is an adequate air supply to the fire with a good glow. Ash must be riddled away and removed.

For certain appliances, there are recommended fuels and these should use as per the manufacturers guidance. As a general rule the Guild recommends dry seasoned wood. It is clean, gives good heat and is carbon neutral. If you prefer solid fuels, find your local Approved Coal Merchant who will have the expert knowledge to guide you. There are some interesting new fuel mixes coming to the market.

Smoke is leaking back into the room, and could be Immediately Dangerous. Don’t use the fire. Contact us and we can diagnose the problem and advise on the solution.

If a chimney is closed off it can get a bit damp. This can turn soot in to an acidic slurry. In an old chimney this slurry can soak into the internal walls causing severe problems. If bad enough, it can penetrate through to the room where it will cause unsightly stains on the walls. Plaster may need to be removed and the brick treated before re-plastering and redecorating. An unused chimney should always be swept and given a little ventilation top and bottom. Ask us how best to do this for your situation.

View our Blog

Is Your Chimney Tall Enough for a Fire?

By |13 July 2021|

Is Your Chimney Tall Enough for a Fire?   There are so many factors that make a chimney work effectively, but there are two, in particular, that stands out: temperature difference and pressure difference.   [...]

  • Spring sweep

Why Is Spring the Best Time to Get Your Chimney Swept?

By |21 May 2021|

Why Is Spring the Best Time to Get Your Chimney Swept? Go on, admit it - this happened last year to you, didn’t it? Summer already seemed like a distant memory, and the nights were [...]

We’re approved

By using us you can have the peace of mind you will receive an excellent standard of service